Experts in Humidity & Moisture Control

Search

CANNADRYPAKTM

HUMIDITY CONTROL

CANNADRYPAK™ HUMIDITY CONTROL regulates relative humidity (RH) inside the pack in both directions, keeping cannabis flower at its target RH. Over-dried flower becomes brittle and can lose volatile terpenes, while excess moisture raises the risk of mould and microbial growth. The sachets absorb moisture when the pack is too humid and release it when it is too dry, helping maintain a stable RH through storage, transport and dispensing. Designed for pouches, jars and tins, with the set point matched to the product.

Benefits of:

CANNADRYPAKTM

Quality… as an ISO:9001 accredited company, you are assured of highquality products.

Experience…our CANNADRYPAK™ HUMIDITY CONTROL team has over 30 years of experience helping customers across the globe with a wide range of laminates.

Single Supplier… we can support you as your business grows going from loose sachets to CANNADRYPAK™ HUMIDITY CONTROL sachets on reel and even offer CANNADRYPAK™ BARRIER BAGS to enhance your products shelf life. A one-stop shop for your medical cannabis packaging requirements.

Design… we can help you transform your imagination into reality. We offer a wide range of printing facilities for pouches and rolls.

Need More Details?

…click to download our Product Guidebook

Baltimore Innovations Guidebook Icon

Need More Details

...click to download our Product Guidebook

What Our Customers Say…

Rated 5 out of 5

“Always quick response. Always good availability of sales contact”

Stefan Nebelung, UK

Faiz Rafi

Product Expert For:

CANNADRYPAK™

Medical Cannabis Packaging

More info on our Medical Cannabis Packaging:

Your product’s target RH will decide the right range. Finished cannabis flower is commonly targeted at a water activity (aW) of 0.55–0.65, which at equilibrium corresponds to 55–65% RH inside the cannabis packaging. We can supply bespoke sizes and set RH target points to suit your requirements.

It depends on five factors: product weight, headspace, cannabis packaging barrier performance (its moisture vapour transmission rate, MVTR), storage conditions and the required shelf life. The pouch and the sachet work as one system. A high-barrier pouch admits very little moisture, so it needs a smaller sachet than a pouch with a poor barrier. We therefore size the sachet to your finished pack and required RH, not to a generic table.

Yes. In a sealed pack, a change in temperature changes the RH and shifts the balance between the flower and the sachet, so a pack in a warm room or hot delivery vehicle behaves differently from one on a cool shelf. The sachet buffers these swings, but its capacity is finite. If your product ships to warm climates, we recommend stability testing under your expected storage and transport conditions, including accelerated conditions.

Terpenes are volatile and are lost by evaporation, and over-dried flower loses them faster. At the other end, the risk of mould and other microbial growth increases as water activity rises above about 0.65. A two-way pack helps hold the in-pack RH between these limits instead of relying on the product not drifting, which matters most for long shelf lives and unpredictable storage and transport chains.

A one-way desiccant such as CANNADRYPAK™ MOISTURE ABSORBER is designed to only removes moisture in a sealed pack, and bring down the RH. A twoway pack such as CANNADRYPAK™ HUMIDITY CONTROL buffers the pack at a set RH, absorbing moisture when RH rises above the set point and releasing it when RH falls below. That makes it the better choice for long-term maintena nce, while a one-way desiccant suits pre-conditioning product that is above target.

Complementary Products…

CANNADRYPAK
MOSITURE ABSORBER
CANNADRYPAK
CANNADRYPAK
BARRIER BAGS
CANNADRYPAK
B-SURE
Barrier Foil Rolls
B-SURE™ Rolls – Barrier Foil Rolls – Mixed solutions of barrier foil packaging

Book a Free Consultation

…and let us help you with your project!